|
Post by indiehouse on May 19, 2018 11:23:03 GMT -6
Or maybe just tell me the install wire color order?
|
|
|
Post by adamjbrass on May 19, 2018 15:08:20 GMT -6
Would one of you fine dudes be willing to send me a picture of how the transformer is wired on this U67 reissue? I would be so, so grateful. adamjbrassIn 2 weeks our unit will return. Maybe I'll have a chance then. But....Why?
|
|
|
Post by indiehouse on May 21, 2018 15:06:01 GMT -6
Would one of you fine dudes be willing to send me a picture of how the transformer is wired on this U67 reissue? I would be so, so grateful. adamjbrass In 2 weeks our unit will return. Maybe I'll have a chance then. But....Why? No worries, I've found the help I needed. Thanks!
|
|
|
Post by adamjbrass on May 22, 2018 5:22:49 GMT -6
I guess the why wasn’t important for me to know....
|
|
|
Post by donr on May 22, 2018 7:39:14 GMT -6
|
|
|
Post by kcatthedog on May 22, 2018 7:45:42 GMT -6
I thought Jim W referenced it !
|
|
|
Post by Bob Olhsson on May 22, 2018 8:03:55 GMT -6
It's illegal in the EU.
|
|
|
Post by Ward on May 22, 2018 10:47:15 GMT -6
So is having a backbone . . . but anyhow, I digress...
|
|
|
Post by EmRR on May 30, 2018 12:39:14 GMT -6
Can anyone with one of these tell what value of C17 is used in the reissue? This part trims the treble content. -------edit-------
at least one report of 160pfd, so now curious if they are using various values in that position to trim response to a standard, or if that is a stock value across the board.
Original schematic shows a range 80-160pfd, though I've heard that it was later standardized as a 100pfd part.
|
|