|
|
Post by easyrider on Mar 25, 2024 6:25:53 GMT -6
In the process of acquiring some hardware for tracking…I have an Audient ASP 880 for drums and I’ve bought a couple of Audioscape pieces…got my drums 20 metres away in another building and running Audio over cat 6 into my humble little control room. Here is the start of my adventure into more analogue. please post pics of your racks…and host them on imgur of similar as no to hammer forum storage cheers !    |
|
|
|
Post by svart on Mar 25, 2024 7:02:58 GMT -6
Mine is always changing, but it's less full than it used to be. I'm considering going down to two racks at this point, but here's a couple-year-old photo:  |
|
|
|
Post by kcatthedog on Mar 25, 2024 7:50:05 GMT -6
Still rockin the Dutch!  |
|
|
|
Post by copperx on Mar 25, 2024 7:57:20 GMT -6
I'm considering going down to two racks at this point Oh-oh! You're going the wrong way! |
|
|
|
Post by ninworks on Mar 25, 2024 8:05:39 GMT -6
|
|
|
|
Post by Shadowk on Mar 25, 2024 9:34:22 GMT -6
It's a bit out of date now, I have another tracking room and that's allowed me to put everything in (finally) so it's less messy but you get the gist:
|
|
|
|
Post by drbill on Mar 25, 2024 9:50:13 GMT -6
Rack? Singular? Haha.... Well, if you really want to save storage space on the forum, best to hit up my Instagram :
drbill.mojo
20+ racks, and pretty much solidified at this point.
|
|
|
|
Post by geoff738 on Mar 25, 2024 10:19:35 GMT -6
 My cramped setup. A few bits and bobs not pictured. Daking pre, Gap pre, rnc comp, dbx comp. cheers, Geoff |
|
|
|
Post by prene1 on Mar 25, 2024 11:13:34 GMT -6
|
|
|
|
Post by copperx on Mar 25, 2024 11:14:04 GMT -6
Rack? Singular? Haha.... Well, if you really want to save storage space on the forum, best to hit up my Instagram : drbill.mojo 20+ racks, and pretty much solidified at this point.
After perusing your instagram account I'm new more interested in your A/C setup!
|
|
|
|
Post by copperx on Mar 25, 2024 11:15:02 GMT -6
View AttachmentMy cramped setup. A few bits and bobs not pictured. Daking pre, Gap pre, rnc comp, dbx comp. cheers, Geoff
I spy a Kurzweil Rumour in there. How do you like it?
|
|
|
|
Post by subspace on Mar 25, 2024 11:20:23 GMT -6
Mic pre/EQ/interface rack,  Just re-shuffled the Dynamics/500 rack,   |
|
|
|
Post by drbill on Mar 25, 2024 11:27:48 GMT -6
Rack? Singular? Haha.... Well, if you really want to save storage space on the forum, best to hit up my Instagram : drbill.mojo 20+ racks, and pretty much solidified at this point.
After perusing your instagram account I'm new more interested in your A/C setup!
What do you want to know? It's a dual Fujitsu mini split system. Quiet. The main CRM is a cassette that mounts in the ceiling. The machine room has a traditional wall mounted unit. |
|
|
|
Post by copperx on Mar 25, 2024 11:37:06 GMT -6
After perusing your instagram account I'm new more interested in your A/C setup!
What do you want to know? It's a dual Fujitsu mini split system. Quiet. The main CRM is a cassette that mounts in the ceiling. The machine room has a traditional wall mounted unit.
Cool! Is it a 1-ton, 1.5-ton, 2-ton mini split?
|
|
|
|
Post by easyrider on Mar 25, 2024 11:59:09 GMT -6
Mic pre/EQ/interface rack, Just re-shuffled the Dynamics/500 rack,  How have you found thst Midas rack? |
|
|
|
Post by drbill on Mar 25, 2024 12:04:55 GMT -6
What do you want to know? It's a dual Fujitsu mini split system. Quiet. The main CRM is a cassette that mounts in the ceiling. The machine room has a traditional wall mounted unit.
Cool! Is it a 1-ton, 1.5-ton, 2-ton mini split?
Not sure. I don't think they categorize mini splits in those traditional terms. At least I don't think Fujitsu does. They are 24,000 BTU's in the CRM and 18,000 BTU's for the machine room. Hope that helps.... Oh - just checked conversion graph. I think the CRM is 2 tons, and the machine room is 1.5 tons. I tried to get them to install more headroom into the system (knowing that growth is inevitable), but my HVAC guy is kind of against that philosophy. He says better to figure out the total use in watts, and give just a touch "over" if possible. |
|
|
|
Post by geoff738 on Mar 25, 2024 12:05:33 GMT -6
View AttachmentMy cramped setup. A few bits and bobs not pictured. Daking pre, Gap pre, rnc comp, dbx comp. cheers, Geoff
I spy a Kurzweil Rumour in there. How do you like it?
Good eye! When I got it it was still back in the Adat days. I still think the plates and smaller rooms in particular sound decent, but it is limited to 48k so I am not sure I’m going to keep it. I dunno really. Cheers, Geoff |
|
|
|
Post by chessparov on Mar 25, 2024 12:30:15 GMT -6
Will ketchup on the "Gear Porn" here before bed. Just a tame "one Rack"  guy here. "Back in the Day of 90's Prosumer. Alesis/DBX/Ashley OH My! Rather than the Harem approach. Chris |
|
|
|
Post by subspace on Mar 25, 2024 12:31:38 GMT -6
Mic pre/EQ/interface rack, Just re-shuffled the Dynamics/500 rack, How have you found thst Midas rack? Fine for line level processing, switching PSU noise shows up with high gain unshielded preamp modules, so I use an Aphex four space for those. |
|
|
|
Post by chessparov on Mar 25, 2024 12:32:27 GMT -6
In the process of acquiring some hardware for tracking…I have an Audient ASP 880 for drums and I’ve bought a couple of Audioscape pieces…got my drums 20 metres away in another building and running Audio over cat 6 into my humble little control room. Here is the start of my adventure into more analogue. please post pics of your racks…and host them on imgur of similar as no to hammer forum storage cheers ! Reminds me. I need a new rug. For the floor too. |
|
|
|
Post by easyrider on Mar 27, 2024 9:46:29 GMT -6
Reminds me. I need a new rug. For the floor too. Hugs and rugs, everyone needs |
|
|
|
Post by mjheck on Mar 28, 2024 7:20:31 GMT -6
Prene1 - three Zulus! I see one set similarly to how I use mine on the two bus, but two look to have some real crush to them - are you tracking through these, or using them as different busses?
DrBill - your IG is legendary - great photography too. You have all the skills!
MJH
|
|
|
|
Post by prene1 on Mar 28, 2024 14:27:58 GMT -6
Prene1 - three Zulus! I see one set similarly to how I use mine on the two bus, but two look to have some real crush to them - are you tracking through these, or using them as different busses? DrBill - your IG is legendary - great photography too. You have all the skills! MJH I have 4 of them. I track 8 tracks at a time and also bus if needed. |
|
|
|
Post by Bat Lanyard on Mar 29, 2024 9:00:40 GMT -6
Cool! Is it a 1-ton, 1.5-ton, 2-ton mini split?
Not sure. I don't think they categorize mini splits in those traditional terms. At least I don't think Fujitsu does. They are 24,000 BTU's in the CRM and 18,000 BTU's for the machine room. Hope that helps.... Oh - just checked conversion graph. I think the CRM is 2 tons, and the machine room is 1.5 tons. I tried to get them to install more headroom into the system (knowing that growth is inevitable), but my HVAC guy is kind of against that philosophy. He says better to figure out the total use in watts, and give just a touch "over" if possible. Over doing it is a thing my guy also agrees with, like where wood floors are concerned you can actually create moisture issues it the unit is over-sized. I'm running a 1.5 ton Mitsubishi mini-split in my room. As drbill stated, it too is extremely quiet and efficient. Highly recommend those little suckers! |
|
|
|
Post by bikescene on Mar 29, 2024 9:28:47 GMT -6
Here’s my baby rack in my home studio, which I’ve outgrown.  |
|
guy here.
