|
|
Post by wiz on Aug 25, 2017 18:43:30 GMT -6
BART HK EQ5169
I grabbed two of these to DIY See how they go, will report back cheers Wiz
|
|
|
|
Post by jcoutu1 on Aug 25, 2017 19:20:54 GMT -6
What's this based on? Looks like a nice low part count, which I can handle.  |
|
|
|
Post by wiz on Aug 25, 2017 22:21:22 GMT -6
Studer I think.
It was a bit cheaper when I got them
Cheers
Wiz
|
|
|
|
Post by kcatthedog on Aug 26, 2017 16:38:12 GMT -6
demo is nice !!
|
|
|
|
Post by wiz on Sept 3, 2017 16:11:01 GMT -6
The kits arrived, there was some delay... communication was good though. There were 3 1K5 resistors missing from one of the kits....which though frustrating, was solved easily as there is a shop in town that sells components..still, that shouldn't happen.... again communication was good. Build was straight forward, I made a single error on the build, which was my fault, I put a link in the wrong way... again communication was good. I quickly tested the sound yesterday and did some sweeps, and its all working.... the boosts are a little "ripple-y" but the cuts are perfect... The functionality of the EQ is pretty versatile between the selections of the frequencies and the mid boost/cut... you can do the pultec curve thing. I compared it really briefly against my modified Delta EQ and its, different. Slightly softer sounding was my first reaction.... I really didn't get much of a test... I will do more. The price of the kit at 189USD was pretty good I thought for what I got... I think that price is rising to 229USD. Only time will tell how well it works. Will probably build the second kit today... I might end up selling one at cost, so hit me up if you are interested... Cheers Wiz   |
|
|
|
Post by wiz on Sept 3, 2017 21:31:59 GMT -6
Finsihed the second one... of course faster and easier to build...
I like building stuff....8)
cheers
Wiz
|
|
