|
|
Post by stratboy on Nov 16, 2016 20:56:44 GMT -6
I picked up a jet city boost A/B pedal at a garage sale. It's a nice little unit with a decent clean boost, but the A/B and boost switches pop loudly when activated. Any thoughts on the right approach to eliminating or softening the loud clunk are much appreciated!
|
|
|
|
Post by jimwilliams on Nov 17, 2016 10:55:13 GMT -6
Add a resistor after the output to ground as there may be a charge built up in the output blocking cap if a discharge resistor is not added. It could be as low as 47k or as high as 1 meg ohms, depending on the impedance seen.
|
|
|
|
Post by stratboy on Nov 17, 2016 18:49:46 GMT -6
Thanks, Jim! I will give it a try.
|
|
