|
Post by RicFoxx on Feb 7, 2015 11:56:51 GMT -6
I guess this is mostly for singer/song writers but anyone can play...Id like to hear everyones story of how they got involved in recording...heres a short overview of mine and what I would do if I were 20 and starting off.
First off, Im not a professional engineer...I am someone who inspired to be a singer songwriter and bought a 4 track cassette recorder when i was 20. With that, an Alesis SR-16, SM57, Alesis Reverb and a Korg Pandora guitar processor I had the most fun ever. I learned how to use all of those things to the max and it was like crack...it made me irresponsible because all I wanted to do is sit in my room and record. I just wrote, played and recorded. I kept that setup for a while only upgrading the recorder to a tascam 8 track cassette recorder until I read one day about something called Pro Tools and the Digi 001. I immediately put one on my credit card along with a computer that was Pro tools certified, I think that is where the madness started. When I found PurpleSlutz it was like fuel on a fire. All of a sudden I didn't think I could make a good song if I didn't have Preamp X or converterX. I truly have enjoyed learning gear and the different sounds but it deterred me from my ultimate goal of writing and recording songs.
So...after this long journey in which I have thoroughly enjoyed...If I were me 21 years ago and my goal was to write and produce my own album on my own, I would buy an Apollo Twin and focus on my playing and buy only quality instruments and demo work at home and thoroughly enjoy it and then I would find the best local producer/engineer that I had a connection with to collaborate and record in a great facility with quality gear.
So this is my story...whats yours???
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 7, 2015 18:22:14 GMT -6
Probably do it as a hobby, I got roped in doing mixes and masters for friends then I became too booked up to just leave. Now here I am nearly a decade and a half later with a scrapbook of ideas .. It's a blessing in disguise for me the market has flip turned and everyone is DIY, because I can finally do my own thing. Although much love to pro engineers in the woods, I do hope everything is going well for you .
|
|
ericn
Temp
Balance Engineer
Posts: 16,105
Member is Online
|
Post by ericn on Feb 9, 2015 21:40:18 GMT -6
OK Rick I had to think about this and the way Ill approach it is what would I tell 14 year old me if 30 years ago If I could give him a game plan from everything I know today. First Don't buy that Tascam model 3, that thing was noisy had no headroom and -10 is a pain. Keep all those old EV, Shure, and AKGs don't let a single mic go! When it comes to electronics to go half assed, save and buy what you really want,or your going to buy sell, buy, sell the fiscal equivalent of a 1176 before you buy an 1176 and that 1176 is going to wow you! Keep that MCI 2 in, it might be big heavy and never stay aligned but your going to miss it! Also the Harrison Raven you own for 8 months, it may be a mess and the manual may cost 1/2 what you payed for the board, but don't take that offer for 4 times what you paid for it! The 200b that you used on your first couple of national tours, buy it a big ass PSU and keep that sucker ! When you get to Full Co buy a bunch of those Cheap Gefells and those c414ebs ! The day you see a API 7600 start buying them! A frickin pay as you go API board with dynamics! Stay Current with your PT rig trade in when they go HD and PCIe and HD Native it will cost so much more later.
|
|
|
Post by swurveman on Feb 9, 2015 21:52:21 GMT -6
I was writing songs in Nashville. Knowing the odds, I thought it didn't make sense to go into a studio to pay for demo's. So, I started recording and mixing my own demo's. If I had to do it over again I would buy great instruments and mics first. I also would get my college degree from a university where-if possible- my degree would include a minor in audio engineering.
|
|
|
Post by Randge on Feb 9, 2015 21:56:46 GMT -6
If I were 20 again, I would get into circuit design more and know what I was buying and would have built more of my own gear and saved a lot of money.
R
|
|
ericn
Temp
Balance Engineer
Posts: 16,105
Member is Online
|
Post by ericn on Feb 9, 2015 23:00:22 GMT -6
If I were 20 again, I would get into circuit design more and know what I was buying and would have built more of my own gear and saved a lot of money. R Forgot that one ! For me it should be Spend more time with those fucking geniuses down the hall at Intelix ! Yes for the most part the gear they make is install crap, but if you knew one billionth of What Matt Jim and the rest of these guys know and where some would end up and some othe gear they would go on to be a part of....
|
|