|
|
Post by jcoutu1 on Jan 14, 2015 16:13:06 GMT -6
|
|
|
|
Post by jfoc on Jan 15, 2015 15:31:54 GMT -6
|
|
|
|
Post by svart on Jan 15, 2015 15:34:54 GMT -6
I've bought speakers from madisound, but no kits. I received a tweeter than had slipped out of it's box and was crushed in shipping. I took a bunch of pictures and sent them an email sort of expecting a run around. About an hour later they sent me an apology and a shipping confirmation of a brand new tweeter. No fuss, no accusations, nothing but great service. So while I haven't had a chance to purchase anything from them in a while, I would like to.
I'm seriously thinking about a kit now too. Like my high end speaker thread said, I was thinking about buying something, but now I'm thinking of building a 3 way setup..
But now I'm wondering about these aluminum coned drivers like the L18 or RS180 in combination with the RS28A or the 27TBFC. It's intriguing to use metal as a cone since years ago people rallied against it, but now seem to embrace it.
|
|
|
|
Post by kcatthedog on Jan 15, 2015 15:47:16 GMT -6
if you do a three way, any interest in a build thread ?
|
|
|
|
Post by svart on Jan 15, 2015 15:52:08 GMT -6
if you do a three way, any interest in a build thread ? If I build one, it'll be this one; www.troelsgravesen.dk/SEAS-3-Way-Classic-mkII.htmHowever, I'm also looking at some 3 way options to purchase outright too. Anyway, I'm going to steer this back to the aluminum coned drivers since they are pretty close to the Amphions that are being discussed in the other thread. I'm also seriously considering the Zaph speaker 17: www.zaphaudio.com/audio-speaker17.html |
|
|
|
Post by svart on Jan 15, 2015 15:58:25 GMT -6
|
|
|
|
Post by tonycamphd on Jan 15, 2015 17:28:19 GMT -6
|
|
|
|
Post by tonycamphd on Jan 15, 2015 17:30:19 GMT -6
|
|
ericn
Temp
Balance Engineer
Posts: 16,107 
|
Post by ericn on Jan 15, 2015 19:54:09 GMT -6
I have built a couple of the Zaph SR71 kits great speakers! The guys at Madisound are great as well! Take a look at the kits at Solen as well, Would love a pair of The Wilmslow Audio 3 way Volt Transmission lines! But not sure I could afford the shipping from the UK!
|
|
|
|
Post by svart on Jan 16, 2015 14:14:25 GMT -6
|
|
|
|
Post by svart on Jan 19, 2015 9:49:18 GMT -6
|
|
|
|
Post by ppa on Mar 2, 2015 18:28:08 GMT -6
How do the 101 sound vs the original 100? |
|
|
|
Post by tonycamphd on Mar 3, 2015 1:42:18 GMT -6
How do the 101 sound vs the original 100? I just built the boxes, i have nothing in them yet, i'll let you know when i do for sure bud 8) |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 3, 2015 6:28:33 GMT -6
Tony, did you buy the full kit at Jantzen, Denmark?
|
|
|
|
Post by tonycamphd on Mar 3, 2015 8:34:24 GMT -6
Not yet Small
|
|
|
|
Post by svart on Mar 3, 2015 9:06:56 GMT -6
I'm interested in how much shipping is from Janzen. I still plan on doing one of the 3 way kits from Janzen/Troels, but I have to believe that shipping a bunch of drivers from Denmark can't be cheap..
|
|
|
|
Post by ppa on Mar 3, 2015 13:35:08 GMT -6
I'm interested in how much shipping is from Janzen. I still plan on doing one of the 3 way kits from Janzen/Troels, but I have to believe that shipping a bunch of drivers from Denmark can't be cheap.. yes, the weight is not so low...... a thing I dislike in this project is that the wf has foam surround However, I hope it sounds very fine and less monitor of the original. |
|
