deni
Full Member
Posts: 49 
|
Post by deni on Nov 5, 2014 17:06:51 GMT -6
Hey guys,
Here's a short demo video we made for our Model 2 ribbon mic. Everything was recorded with the Model 2 going into a Focusrite Saffire 56 interface. All the tracks are unprocessed. The drums were recorded in large untreated room so they've got a very roomy sound! Check it out!
-Deni
|
|
|
|
Post by wiz on Nov 5, 2014 17:56:49 GMT -6
pretty impressive with no processing...
very cool
cheers
Wiz
|
|
|
|
Post by Johnkenn on Nov 5, 2014 18:03:06 GMT -6
Nice!
So - tell me more about this rise at 13kHz. Is this going to sound like a dark condenser? Does it roll off after that?
|
|
deni
Full Member
Posts: 49
|
Post by deni on Nov 5, 2014 18:06:47 GMT -6
pretty impressive with no processing... very cool cheers Wiz Thanks! -Deni |
|
deni
Full Member
Posts: 49
|
Post by deni on Nov 5, 2014 18:13:03 GMT -6
Nice! So - tell me more about this rise at 13kHz. Is this going to sound like a dark condenser? Does it roll off after that? There's a broad 3dB boost centered around 13kHz which then rolls off to a -2db point at 20kHz. Not sure if I would describe it as a dark condenser since most condensers I've heard all have a boost starting around the 8kHz area up to 13-15kHz. The Model 2 is flat all the way to around 10kHz before it starts to rise, so the boosted high end is more "airy" and gives it a more open high end. Hope this explanation helps! Here's a vocal clip compared to a Gefell with a UM70 capsule and some other ribbons: soundcloud.com/mesanovicmicrophones/sets/model-2-comparison-session-Deni |
|
