|
|
Post by sopwith on Aug 11, 2014 23:00:21 GMT -6
Anything else with that 4 pres + 8 channels of conversion layout, but a smaller form factor?
|
|
|
|
Post by jontheriffer on Aug 12, 2014 7:31:40 GMT -6
Audient ASP880
|
|
ericn
Temp
Balance Engineer
Posts: 16,098 
|
Post by ericn on Aug 12, 2014 8:44:27 GMT -6
If you can find one Panasonic / Ramsa WZAD96M
|
|
|
|
Post by Ward on Aug 12, 2014 9:43:08 GMT -6
Because.... you don't have room for two rack spaces?
|
|
|
|
Post by sopwith on Aug 12, 2014 16:31:04 GMT -6
This may well be what I end up with Portability is paramount. That said, the specs show the UAD710 isn't quite as heavy as I thought it would be from the size of the thing. |
|
|
|
Post by Koln on Aug 12, 2014 17:19:22 GMT -6
Midas XL48.
AES/ADAT/Analog outputs.
|
|
|
|
Post by sopwith on Aug 12, 2014 17:56:22 GMT -6
Midas XL48. AES/ADAT/Analog outputs. This looks great. Digging all the outs. Any word on these pre's vs the audients? (I'll do some searching on that). Looks like I may not find anything other than the 710d which has 4 pres but 8 channels of conversion - was looking to pair this with a Lunchbox containing a few nice pres and have it convert everything. |
|
|
|
Post by Koln on Aug 12, 2014 18:09:16 GMT -6
It has line inputs too.
|
|
|
|
Post by jontheriffer on Aug 13, 2014 7:23:39 GMT -6
I don't think so. Parrell mix/line. |
|
|
|
Post by jontheriffer on Aug 13, 2014 7:29:29 GMT -6
Nice auto correct. Parallel
|
|
|
|
Post by jontheriffer on Aug 13, 2014 7:32:57 GMT -6
Midas XL48. AES/ADAT/Analog outputs. This looks great. Digging all the outs. Any word on these pre's vs the audients? (I'll do some searching on that). Looks like I may not find anything other than the 710d which has 4 pres but 8 channels of conversion - was looking to pair this with a Lunchbox containing a few nice pres and have it convert everything. You can hit the Audient converters direct using its inserts |
|
|
|
Post by Koln on Aug 13, 2014 8:38:31 GMT -6
I don't think so. Parrell mix/line. I do think so... Not gonna argue more about it. |
|
|
|
Post by jcoutu1 on Aug 13, 2014 9:23:37 GMT -6
I don't think so. Parrell mix/line. I do think so... Not gonna argue more about it. The line inputs are just padded mic inputs, not separate line inputs. The line ins still go through the mic pre circuitry. As jontheriffer said, it's Parallel mic/line inputs. |
|
|
|
Post by Koln on Aug 13, 2014 9:48:17 GMT -6
Looks like you guys never worked on Midas consoles before.
|
|
ericn
Temp
Balance Engineer
Posts: 16,098
|
Post by ericn on Aug 13, 2014 10:01:20 GMT -6
Looks like you guys never worked on Midas consoles before. Remember Audient is a kissing Cousin of Midas, the XL200 was a Davis Deardon design, While 99% of the time I would rather the Midas Pre, For Classical Id lean towards Audient. |
|
|
|
Post by jcoutu1 on Aug 13, 2014 10:04:25 GMT -6
Looks like you guys never worked on Midas consoles before. Are you kidding me? We're not talking about Midas consoles here, we're talking about the 1U rackmount solution. There are no inputs on that box that avoid the preamp circuitry. There isn't even a switch to switch to line mode, just a pad. Page 25 shows that. www.midasconsoles.com/assets/XL48-Mic-Pre-amp-Manual_M_WW.pdfDo a little research before being condescending next time. Ohh yeah, look at that, a pic of my Midas.  |
|
|
|
Post by Koln on Aug 13, 2014 14:10:04 GMT -6
That's what i was saying : you have never used a Midas console.
|
|
|
|
Post by jcoutu1 on Aug 13, 2014 14:16:20 GMT -6
That's what i was saying : you have never used a Midas console. What I'm saying: you don't understand signal flow. |
|
|
|
Post by Koln on Aug 13, 2014 14:27:31 GMT -6
Sure...What ever.
I'll stop arguing with a drummer and his chinese mixer.
To the OP : sorry for this GS type argument.
Let's get back to the original topic.
|
|
|
|
Post by sopwith on Aug 13, 2014 15:24:26 GMT -6
realgearslutzonline...
alrighty then - no one has my 1/2 rack space, 4 sweet pre, 8 channels of conversion, line-in-via-inserts dream unit?
|
|
ericn
Temp
Balance Engineer
Posts: 16,098
|
Post by ericn on Aug 13, 2014 17:18:00 GMT -6
Nope your looking for a strange combination my man!
|
|
|
|
Post by sopwith on Aug 13, 2014 18:03:14 GMT -6
Haha, indeed! It's either pay for a few extra pre's, or just get a standalone coverter. Guess I got some thinking to do.
|
|
|
|
Post by jcoutu1 on Aug 13, 2014 18:05:02 GMT -6
Haha, indeed! It's either pay for a few extra pre's, or just get a standalone coverter. Guess I got some thinking to do. It looks like you can do 2 channels of line in and 8 pres with the True Precision 8. Close... |
|
|
|
Post by Ward on Aug 14, 2014 5:12:05 GMT -6
This has turned into the funniest thread on ... what forum is this again?
|
|
|
|
Post by sopwith on Aug 14, 2014 5:20:04 GMT -6
Oh man - on my first rgo thread too, hahaha. The Midas looks great, but it does indeed look like all inputs go through the pre circuit. Certainly points for all solutions presented here. That TP8 would be fantastic, but I think I need to get my vocal chain in order before grabbing that and upgrading my interface/converters.
|
|
