|
|
Post by EmRR on May 21, 2024 6:28:39 GMT -6
The RE50 is sort of the more expensive version, but seams to go for less used. It’s supposed to have less handling noise but come on it’s an Omni, it’s the nature of the beast! Personally I always preferred 635a’s for the smaller size and slightly more natural tone, 50’s always sound like interview mics. Every mic kit should have at least one dynamic Omni. But does a dynamic omni truly exist? Aren't we talking oblong wide cardioids here? Pressure omni is pressure omni, capsule and body size are the modifiers, so a 635A will be more omni than the rare pressure omni LDC, and something like a DPA 4060 will be the most omni. |
|
|
|
Post by chessparov on May 21, 2024 11:54:02 GMT -6
Don't they sometimes use double wide oblong mics...
For movie trailers?
Chris
|
|
|
|
Post by Ward on May 22, 2024 7:27:26 GMT -6
Don't they sometimes use double wide oblong mics... For movie trailers? Chris They stopped using those after 'Ozark' was canceled. |
|
|
|
Post by chessparov on May 22, 2024 12:16:37 GMT -6
Great show!  I decided to use my EV635a, for my "one minute"/Johnny Cash Verse. Partly in honor of its use in his TV Show. And also "Various and Sundry" 60's/70' TV broadcasts. It's a Cover of "Highwayman". Then my BU67 and/or BZ "Elly" on a later full version of the whole song. Probably in a deeper Key, to experiment with. Chris |
|
|
|
Post by jaba on May 22, 2024 16:51:46 GMT -6
You can also use a pair as overheads if you have a good sounding room tone and use the cardioid sdc pair to spot mic the cymbals. Used a pair once as overheads for a mallet/tom-heavy drum part and it was kind of perfect. |
|
|
|
Post by Ward on May 23, 2024 6:47:13 GMT -6
Any else expecting Warm's next mic to be a WA635?
|
|
|
|
Post by drumsound on May 23, 2024 8:55:59 GMT -6
Any else expecting Warm's next mic to be a WA635? I was pretty surprised they cloned the D19, so it's possible. |
|
ericn
Temp
Balance Engineer
Posts: 16,086 
|
Post by ericn on May 23, 2024 11:34:55 GMT -6
Any else expecting Warm's next mic to be a WA635? I was pretty surprised they cloned the D19, so it's possible. The story always was the RE50 and 635a used the same capsule, knowing Bosch I have to wonder if they have updated the design to keep manufacturing costs down and updated the IP. |
|
|
|
Post by chessparov on May 23, 2024 11:43:38 GMT -6
So it WAS a Bosch'd job! |
|
|
|
Post by chessparov on May 23, 2024 11:44:32 GMT -6
You can also use a pair as overheads if you have a good sounding room tone and use the cardioid sdc pair to spot mic the cymbals. Used a pair once as overheads for a mallet/tom-heavy drum part and it was kind of perfect. Was it... Nirvana? |
|
ericn
Temp
Balance Engineer
Posts: 16,086
|
Post by ericn on May 23, 2024 12:55:53 GMT -6
Used a pair once as overheads for a mallet/tom-heavy drum part and it was kind of perfect. Was it... Nirvana? It smelled like something but it wasn’t Teen Spirit 😁 |
|
|
|
Post by jaba on May 23, 2024 14:03:11 GMT -6
Used a pair once as overheads for a mallet/tom-heavy drum part and it was kind of perfect. Was it... Nirvana? Close. Nirvana cover band. Used only drum mallets, singing bowls, and sighs. |
|
|
|
Post by Ward on May 23, 2024 19:10:02 GMT -6
Close. Nirvana cover band. Used only drum mallets, singing bowls, and sighs. So they went down a hole? |
|
ericn
Temp
Balance Engineer
Posts: 16,086
|
Post by ericn on May 23, 2024 19:36:35 GMT -6
Close. Nirvana cover band. Used only drum mallets, singing bowls, and sighs. So they went down a hole? Oh this is so bad and so inappropriate JK if you don’t approve edit it, but only Kurt went down on a member of Hole.😁 |
|
