|
|
Post by Omicron9 on Feb 11, 2022 11:18:47 GMT -6
|
|
|
|
Post by dok on Feb 11, 2022 11:38:48 GMT -6
No experience directly but they're only 1 1/8" thick according to the specs - they're not going to reach down very low until they start getting 3-4" thick.
|
|
|
|
Post by gwlee7 on Feb 11, 2022 11:59:01 GMT -6
I would buy the 703 or equivalent and make my own. These are way too thin to do any thing we would want them for. If I can build them, anyone can. You can get cases of 6pc, 2” thick for around $80 and then use spray adhesive to glue the pieces together at the thickness you want. It’s easy to cover them. And if you have a wholesale insulation supplier nearby I believe you can get them even cheaper. $169 for two is way too much money IMO especially since they aren’t even what you need. You would be better off buying from GIK or someone similar if you can’t build your own.
|
|
|
|
Post by Ned Ward on Feb 11, 2022 12:47:10 GMT -6
|
|
|
|
Post by bgrotto on Feb 11, 2022 17:33:49 GMT -6
That's more expensive than GIK at about a third of the thickness, and without the GIK's air gap. Not to mention selection of colors for the fabric.
|
|
|
|
Post by Omicron9 on Feb 13, 2022 10:59:36 GMT -6
Great info; thanks, everyone!
|
|
