|
Post by Ward on Mar 15, 2019 5:49:43 GMT -6
I hope you guys are sitting down because this may be shocking but... Another week and I still don’t have an ADG on the way. I KNOW, I KNOW. Who could have seen this coming.
|
|
|
Post by kcatthedog on Mar 15, 2019 6:44:55 GMT -6
ah, just to be clear is it NMFR day ?
|
|
|
Post by stam on Mar 15, 2019 7:11:14 GMT -6
Sorry Ragan PCB's get here on Wednesday, I have 150 pieces ready to mount but my hands are tight until I get them Please bare with me a few more days, it will come
|
|
|
Post by the other mark williams on Mar 15, 2019 7:37:42 GMT -6
And I *still* don’t have an invoice, despite two (unanswered) emails to stam.
|
|
|
Post by ragan on Mar 15, 2019 13:38:06 GMT -6
Sorry Ragan PCB's get here on Wednesday, I have 150 pieces ready to mount but my hands are tight until I get them Please bare with me a few more days, it will come Ok. At least that gives me some data point rather than just “it’s shipping!” every week and then nothing. If you can get mine out quickly once you get PCBs I may actually get to use it for a day or two before school starts back up. Not holding my breath though.
|
|
|
Post by indiehouse on Mar 15, 2019 15:26:52 GMT -6
Sorry Ragan PCB's get here on Wednesday, I have 150 pieces ready to mount but my hands are tight until I get them Please bare with me a few more days, it will come Dude, this is exactly the transparency we've all been looking for. I wish you would have said it last month or heck, even in December, that you didn't even have the PCB's yet. I don't think you would have had so many dogs barking at you, at least around here. This info even cooled my jets about my order...a little.
|
|
|
Post by kyzermf on Mar 15, 2019 17:19:47 GMT -6
Hmm for some reason today I have to push the input signal too hard to get GR and the signal becomes super distorted. Any ideas what could be causing this? Doesn't matter what level signal I push in, in order to get GR it gets to a point where it's too hot. Didn't have this issue a couple days ago
|
|
|
Post by kcatthedog on Mar 15, 2019 17:30:38 GMT -6
In a,d or g ?
|
|
|
Post by kyzermf on Mar 16, 2019 8:54:06 GMT -6
All of the above 🤔 just to make sure I hadn't fudged up some i/o settings I ran into different compressors and it worked fine. I did have the compressor running for hours but that shouldn't affect anything right?
|
|
|
Post by kcatthedog on Mar 16, 2019 8:57:26 GMT -6
Well it shouldn’t super distort as you describe.
I’d email Teo at Stam and see what he advises?
|
|
|
Post by kyzermf on Mar 16, 2019 8:58:35 GMT -6
Well it shouldn’t super distort as you describe. I’d email Teo at Stam and see what he advises? Yeah that's what I was thinking too, thank you, does Teo have an email other than info@stam? Might be something minor I can fix really quickly
|
|
|
Post by kcatthedog on Mar 16, 2019 9:43:49 GMT -6
|
|
|
Post by stam on Mar 17, 2019 11:21:34 GMT -6
support@stamaudio.com
|
|
|
Post by sam on Mar 18, 2019 22:17:40 GMT -6
I personally don't believe there is such thing as bad PR... Please make t-shirts available with this slogan printed under the company logo, I'd order one tomorrow. You won’t see the shirt for 18 months!
|
|
|
Post by pope on Mar 19, 2019 2:32:27 GMT -6
I personally don't believe there is such thing as bad PR but point taken! Don't you find this quite insulting and disrespectful towards all those people waiting for their gear?
|
|
|
Post by kcatthedog on Mar 19, 2019 5:25:18 GMT -6
I have been remixing a song after getting the adgs into the patchbay.
Being able to switch so easily between the 3 circuits, is really great and the adg certainly has very nice presence and focus: everything works as it should.
The waiting is no fun, but the units work great.
|
|
|
Post by ragan on Mar 20, 2019 20:18:57 GMT -6
Sorry Ragan PCB's get here on Wednesday, I have 150 pieces ready to mount but my hands are tight until I get them Please bare with me a few more days, it will come Hey Joshua. Did you get the PCBs today and is there any chance in hell I'll get an ADG to use on my break next week?
|
|
|
Post by the other mark williams on Mar 21, 2019 20:08:36 GMT -6
Sorry Ragan PCB's get here on Wednesday, I have 150 pieces ready to mount but my hands are tight until I get them Please bare with me a few more days, it will come Hey Joshua. Did you get the PCBs today and is there any chance in hell I'll get an ADG to use on my break next week? my guess is “no” and “no”.
|
|
|
Post by the other mark williams on Mar 21, 2019 20:17:26 GMT -6
I’m actually considering getting out of this game. I’m waiting on the ADG (I was supposedly in the first batch, like ragan) and the SA-67. But I’m thinking about pulling the plug.
|
|
|
Post by wiz on Mar 21, 2019 20:24:11 GMT -6
I’m actually considering getting out of this game. I’m waiting on the ADG (I was supposedly in the first batch, like ragan ) and the SA-67. But I’m thinking about pulling the plug. I know the wait is a pain..... but stick in there...the gear is killer cheers Wiz
|
|
|
Post by the other mark williams on Mar 21, 2019 20:28:56 GMT -6
I’m actually considering getting out of this game. I’m waiting on the ADG (I was supposedly in the first batch, like ragan ) and the SA-67. But I’m thinking about pulling the plug. I know the wait is a pain..... but stick in there...the gear is killer cheers Wiz yeah, I’ve got an SA-2A and a 1073MPA over here, and I really love them both. I’m just starting to get a bit of a bad feeling.
|
|
|
Post by drumhead57 on Mar 21, 2019 21:31:45 GMT -6
I’m actually considering getting out of this game. I’m waiting on the ADG (I was supposedly in the first batch, like ragan ) and the SA-67. But I’m thinking about pulling the plug. I'm inches away from that myself
|
|
|
Post by kcatthedog on Mar 21, 2019 21:47:59 GMT -6
the day I had said I was going to cancel was the day I got an email saying my adg’s were ready, so I completely get the frustration. Do what you need to do but the adg is a really nice piece: hang in there.
|
|
|
Post by Quint on Mar 21, 2019 21:50:45 GMT -6
I’m actually considering getting out of this game. I’m waiting on the ADG (I was supposedly in the first batch, like ragan ) and the SA-67. But I’m thinking about pulling the plug. I'm inches away from that myself I'm getting close myself. For several weeks now, and to no avail, I've been attempting to verify what features my first ADG (second batch) will have. There's been a few emails back and forth and no one over there seems to even be able to look up my order and verify whether my ADG will have the super slow attack and stereo link. I need to know this because I'm considering getting a second ADG, but only if it will have identical features to the one I already ordered. Two of these email responses also basically amounted to Josh and Teo each saying "be patient". How hard is it to look my damn order up and respond with that information instead? I'm 50% confident that, even if we can manage to reach some sort of understanding about my first ADG and the potential second ADG, I will actually receive two identical units in the mail. The communication is just mind numbingly bad.
|
|
|
Post by kcatthedog on Mar 22, 2019 1:05:48 GMT -6
I am sure you saw a reference to the 2nd batch being different but I wondered if they shelved that idea as I sent an email asking if the mkii features would be a diy kit for mki owners , seems odd to change it so quickly? Never heard anything back. Let’s hope they are head down pumping out product
|
|