|
|
Post by drbill on Apr 21, 2018 10:12:13 GMT -6
Awesome Hunter!!!! Look forward to your thoughts after you have some time on them. I was immediately smitten upon first twist, and have been using them every day since getting them. So easy to bend mixes with them. Favorite freq.'s for me have been the bell 45Hz setting (beautiful punch without mud), the 330Hz wide bell (analog tape-ish sound. I have to be careful here....  ), 1.2k/1.5k/1.8k Wide Bell to add excitement where my mixes fell a tad short, and the 6.8k Bell for some nice sheen. I'm using in conjunction with the Silver Bullet Sub and Air EQ'z, and tight / vintage filters. |
|
|
|
Post by roundbadge on Apr 21, 2018 12:35:56 GMT -6
Awesome Hunter!!!! Look forward to your thoughts after you have some time on them. I was immediately smitten upon first twist, and have been using them every day since getting them. So easy to bend mixes with them. Favorite freq.'s for me have been the bell 45Hz setting (beautiful punch without mud), the 330Hz wide bell (analog tape-ish sound. I have to be careful here.... ), 1.2k/1.5k/1.8k Wide Bell to add excitement where my mixes fell a tad short, and the 6.8k Bell for some nice sheen. I'm using in conjunction with the Silver Bullet Sub and Air EQ'z, and tight / vintage filters. I heard them online a year ago.they raised my eyebrows but then completely fell off my radar until you Pete and Paul started raving.. game on!! |
|
|
|
Post by pope on Apr 21, 2018 12:37:48 GMT -6
Thanks to Bill and Pete Min ..MIADS ordered! Did you get a chance to demo them? |
|
|
|
Post by drbill on Apr 21, 2018 14:02:30 GMT -6
Thanks to Bill and Pete Min ..MIADS ordered! Did you get a chance to demo them? Unfortunately, there's no demo's floating around in the States. I went on instinct and faith. Happy that I did. |
|
|
|
Post by paulcheeba on Apr 21, 2018 16:06:34 GMT -6
I've had 'em a year or so and they are the ish. Nothing quite like them.
|
|
|
|
Post by roundbadge on Apr 22, 2018 2:47:17 GMT -6
Thanks to Bill and Pete Min ..MIADS ordered! Did you get a chance to demo them? nah.everyone I know that has them raved. Pete Min down the road from me has a pair I've seen in his rack.loves them.I said Fuggit and jumped in. |
|
|
|
Post by roundbadge on Apr 22, 2018 2:53:57 GMT -6
Did you get a chance to demo them? Unfortunately, there's no demo's floating around in the States. I went on instinct and faith. Happy that I did. there's gonna be at least 3 pair here in LA. the word is out.looks like more folks are getting hip to these. US distributors should step up. |
|
|
|
Post by roundbadge on Apr 22, 2018 2:55:27 GMT -6
I've had 'em a year or so and they are the ish. Nothing quite like them. you,pete and bill got me going! good to see ya here paul! |
|
|
|
Post by paulcheeba on Apr 22, 2018 5:26:45 GMT -6
You too RB! Thanks Mate!
|
|
|
|
Post by paulcheeba on Apr 22, 2018 17:12:24 GMT -6
Makes a change from you and Bill getting me spending. ;-)
|
|
|
|
Post by drbill on Apr 22, 2018 18:18:38 GMT -6
Makes a change from you and Bill getting me spending. ;-) Haha!! Next time you're in the States we'll load you up with gear Paul!!! And yeah, while I was waiting for the gear to clear Customs, I was getting nervous and thought about you a couple of times. heh heh (turnabout is fair play, eh??) Luckily, the duties hit was very minimal here.... |
|
ji43
Junior Member
Posts: 60
|
Post by ji43 on Jul 14, 2022 19:59:31 GMT -6
Thinking of picking up a pair of these; still loving them? Current HW EQs are a pair of Pultec EQM-1S3s and a Curve Bender.
Favorite uses other than mixbus?
|
|
|
|
Post by drbill on Jul 14, 2022 23:41:37 GMT -6
Thinking of picking up a pair of these; still loving them? Current HW EQs are a pair of Pultec EQM-1S3s and a Curve Bender. Favorite uses other than mixbus? Still loving them and using them constantly. After a few years of use, I think I would opt for the +/- 6dB of boost cut though. They are so beautiful, and can be so subtle, that I think the 6dB boost cut version would have been easier for me to L/R match and recall. After a few years of use, I find it's a rare time I'm using more than +/- 6dB. Like them more than my EQP1a's, never used the Curve Bender (yet.. ) |
|
|
|
Post by miadaudio on Jul 15, 2022 6:27:15 GMT -6
Thinking of picking up a pair of these; still loving them? Current HW EQs are a pair of Pultec EQM-1S3s and a Curve Bender. Favorite uses other than mixbus? Still loving them and using them constantly. After a few years of use, I think I would opt for the +/- 6dB of boost cut though. They are so beautiful, and can be so subtle, that I think the 6dB boost cut version would have been easier for me to L/R match and recall. After a few years of use, I find it's a rare time I'm using more than +/- 6dB. Like them more than my EQP1a's, never used the Curve Bender (yet.. ) Hi Bill, Thank you for the kind words! Very glad you like the EQs Changing the dB range is quite easy actually if you have basic soldering skills and to be honest any tech can do it. It's just a matter of changing a few resistors and it shouldn't take more than a couple of hours for both units. I'd be happy to give directions to you or to your tech. If doing it yourself or your tech isn't an option, drop me an email ji43 Thank you for considering the MIAD EQs! If I can be of any help (info, etc..) don't hesitate to contact me at info(at)miad.eu |
|
|
|
Post by drbill on Jul 15, 2022 8:16:32 GMT -6
Still loving them and using them constantly. After a few years of use, I think I would opt for the +/- 6dB of boost cut though. They are so beautiful, and can be so subtle, that I think the 6dB boost cut version would have been easier for me to L/R match and recall. After a few years of use, I find it's a rare time I'm using more than +/- 6dB. Like them more than my EQP1a's, never used the Curve Bender (yet.. ) Hi Bill, Thank you for the kind words! Very glad you like the EQs Changing the dB range is quite easy actually if you have basic soldering skills and to be honest any tech can do it. It's just a matter of changing a few resistors and it shouldn't take more than a couple of hours for both units. I'd be happy to give directions to you or to your tech. If doing it yourself or your tech isn't an option, drop me an email ji43 Thank you for considering the MIAD EQs! If I can be of any help (info, etc..) don't hesitate to contact me at info(at)miad.eu Thanks!! I've got so much on my plate right now, and I'm backed up at least a year. I may put that on my "to do" list. Sounds like I might be able to pull it off myself. Thanks again for making such a great tool for us. |
|
), 1.2k/1.5k/1.8k Wide Bell to add excitement where my mixes fell a tad short, and the 6.8k Bell for some nice sheen. I'm using in conjunction with the Silver Bullet Sub and Air EQ'z, and tight / vintage filters.
