|
|
Post by cowboycoalminer on Dec 30, 2013 13:32:56 GMT -6
Didn't I read on here somewhere that it's possible to use FX on the front end of the Symphony software i.e. , monitor with reverb??
Thanks
|
|
|
|
Post by popmann on Dec 30, 2013 13:37:29 GMT -6
Yes...in cubase turn ON software monitoring. and the monitor (thru) button on the record channel.
Make the channel's reverb send prefader.
Now pull the fader all the way down so you hear no dry.
So, now the dry comes for the board or the Maestro mixer...right? But, all Cubase is "monitoring" is 100% wet. Adjust reverb return as needed.
Related note--use the board. Cheap Y cable if you're using the nice preamp...one leg to a channel on the board feeding the phones...one leg to the Symphony to convert/record. An analog cue will get the track in the pocket faster...sing more in tune...everything is better. Promise it's worth the $15 cable or however much they were.
|
|
|
|
Post by cowboycoalminer on Dec 30, 2013 14:52:15 GMT -6
Thanks Pop. Already got the console setup like that with a Lexicon MX 400. Just want the option of using soft verbs for what knots sometimes. I believe I'm gonna ditch the Apollo so just weighing my options.
|
|
|
|
Post by popmann on Dec 30, 2013 14:54:39 GMT -6
Then same deal...only the above will let you use software reverb like a hardware. The only real extra step is having to turn the fader up to hear playback.
|
|
