|
|
Post by Johnkenn on May 5, 2015 16:14:14 GMT -6
|
|
|
|
Post by Johnkenn on May 5, 2015 16:16:51 GMT -6
Here's more info on Mark's awesome design!
Our obsession for designing completely original, high quality, modern microphones is obvious in our new handcrafted ribbon microphone.
The VL37 uses the same components and has the same sound quality and level of performance found in our critically acclaimed MF65--the microphone, which raised the bar and set new standards for High End ribbon microphones and essentially changed how they are being used by demanding engineers in today’s high resolution recording.
The VL37 unparalleled sound is a result of our attention to detail and level of craftsmanship that goes into each and every component we make. It has a Stainless Steel body and uses a removable anti-vibration shockproof clip.
By selling them directly we can offer them much more affordably to a new audience.
The VL37 high SPL handling, built in pop filter and symmetrical polar response is perfect for demanding producers, musicians and engineers in recording studios and for live sound reproduction.
Featuring:
-one of the kind innovative design
-balanced ruler flat frequency response down to 20Hz (-0.43dB) and unprecedented top end beyond 25kHz
-low noise, low distortion, made in house amorphous core toroidal transformers
-sophisticated motor with shortest front-to-back path ever seen in ribbon microphones
-low-mass ribbon with a unique fine tuning adjustment to assure for consistency from unit to unit
-proprietary corrugation process to maintain ribbon’s integrity without special handling
Manufactured in the USA
5-year parts-2-year ribbon replacement warranty
15-day satisfaction guarantee
|
|
|
|
Post by mdmitch2 on May 5, 2015 16:24:10 GMT -6
Sweet looking (and I'm sure sounding) mic! Entered.
|
|
|
|
Post by kcatthedog on May 5, 2015 16:36:26 GMT -6
Thx Samar and RGO,
Although I could select Canada, the provinces were not listed so I had to select a US state to complete the registration ?
|
|
|
|
Post by Johnkenn on May 5, 2015 16:59:46 GMT -6
Does it still make you choose a state when you put in a different country? No biggie, I'll personally contact the winner and confirm the address.
|
|
|
|
Post by matt on May 5, 2015 17:19:08 GMT -6
Entered!
|
|
|
|
Post by Johnkenn on May 5, 2015 17:23:37 GMT -6
Think I fixed the State thing...
|
|
|
|
Post by mobeach on May 5, 2015 17:29:52 GMT -6
Done!
|
|
|
|
Post by kcatthedog on May 5, 2015 17:32:13 GMT -6
Think I fixed the State thing... Fuck ,declare your presidential bid !!! oh,, that's not what you meant: sorry  |
|
|
|
Post by WKG on May 5, 2015 19:36:03 GMT -6
Nice giveaway. I'm in.
|
|
|
|
Post by Jason on May 5, 2015 22:11:11 GMT -6
I can dig it! Entered, fingers crossed!!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 6, 2015 1:32:15 GMT -6
I'm in under my FB name (Crazed AndConfused).
Let's roll the dice and give the ribbon a transatlantic journey!
:-)
Great Giveaway!
|
|
|
|
Post by odyssey76 on May 6, 2015 4:03:12 GMT -6
Just entered. Good luck to all. What a great addition to anyone's setup!
|
|
|
|
Post by M57 on May 6, 2015 4:24:58 GMT -6
I'm in under my FB name (Crazed AndConfused). Let's roll the dice and give the ribbon a transatlantic journey! :-) Great Giveaway! ..or, just Ship it out to Boston. |
|
|
|
Post by jsteiger on May 6, 2015 8:25:30 GMT -6
Entered!
|
|
|
|
Post by EmRR on May 6, 2015 9:18:32 GMT -6
applying my thread killing skills now....
|
|
|
|
Post by digitalnoize on May 6, 2015 11:13:20 GMT -6
Yahoooo! fingers crossed
|
|
|
|
Post by bluenoise on May 6, 2015 11:19:06 GMT -6
let it be me! i could only work with ribbon mics. and these seem to be the real deal!
|
|
|
|
Post by mrholmes on May 6, 2015 15:53:12 GMT -6
nice mic so i enterd too.....
|
|
|
|
Post by tonycamphd on May 6, 2015 17:58:45 GMT -6
I have 2 Samar modded mics that sound killer, This ones gotta be crazy good! Entered 8)
|
|
|
|
Post by mrholmes on May 6, 2015 19:05:22 GMT -6
The mic designe reminds men on Djongo Reinhardt  |
|
|
|
Post by Johnkenn on May 6, 2015 19:59:56 GMT -6
Hey guys - I would appreciate if you shared this!
|
|
|
|
Post by FB button? on May 7, 2015 1:40:47 GMT -6
Hey guys - I would appreciate if you shared this! FB/G+ Buttons??? |
|
|
|
Post by Johnkenn on May 7, 2015 9:03:09 GMT -6
Ah...I see I need to require you to sign in before entering the contest.
|
|
|
|
Post by Johnkenn on May 7, 2015 9:06:13 GMT -6
And it's easy to share. You can either: copy the URL and paste onto Facebook...or click on the dropbox at the top of the thread (it says "actions") and click on "share"
|
|
