|
Post by Johnkenn on Mar 9, 2020 17:20:38 GMT -6
|
|
|
Post by Johnkenn on Mar 9, 2020 17:23:12 GMT -6
Are they even in business anymore?
|
|
|
Post by nomatic on Mar 9, 2020 17:24:02 GMT -6
How Much?
|
|
|
Amtec 852
Mar 9, 2020 17:31:49 GMT -6
via mobile
Post by tasteliketape on Mar 9, 2020 17:31:49 GMT -6
|
|
|
Post by m03 on Mar 9, 2020 17:52:51 GMT -6
Are they even in business anymore? They have a Facebook update from mid-February, so it looks like they're still around. Not sure how you go about testing / ordering their gear though.
|
|
|
Amtec 852
Mar 9, 2020 18:43:05 GMT -6
via mobile
Post by Johnkenn on Mar 9, 2020 18:43:05 GMT -6
I think DSPdoctor was the distributor and it’s closed.
|
|
ericn
Temp
Balance Engineer
Posts: 14,817
|
Amtec 852
Mar 9, 2020 21:52:29 GMT -6
via mobile
Post by ericn on Mar 9, 2020 21:52:29 GMT -6
I think DSPdoctor was the distributor and it’s closed. Looks like you have to buy Direct from Poland, till they find a US dealer.
|
|
|
Post by adamjbrass on Mar 10, 2020 7:19:31 GMT -6
I have used this compressor and it's out of this world amazing. Contact Lukasz to order.
Here is a demo I did with it,
|
|
|
Post by audioscape on Mar 10, 2020 17:02:19 GMT -6
I have used this compressor and it's out of this world amazing. Contact Lukasz to order.
Here is a demo I did with it,
I've watched this video countless times. This compressor sounds absolutely AMAZING. The Distortion / Lag feature alone is pure GENIUS... would love to know how they're doing the LAG portion. Have an idea on a few ways it could be done but nevertheless, a badass control to have on a piece of analog HW. Thank you SO MUCH for making this video! It's the only one of it's kind hahaha
|
|
|
Post by Johnkenn on Mar 10, 2020 17:15:41 GMT -6
I was trying to ask this in a stam thread...but is the attack time the mount of milliseconds it takes to react to the incoming transient or the amount of time it takes to get to full reduction? That question even make sense?
|
|
|
Post by drbill on Mar 10, 2020 18:09:30 GMT -6
I was trying to ask this in a stam thread...but is the attack time the mount of milliseconds it takes to react to the incoming transient or the amount of time it takes to get to full reduction? That question even make sense? Attack time is the amount of time - usually measured in ms - that it takes for an ITB advocate to reach their crest / peak (measure in the US in RMS) of anger when I say that hardware is significantly better than software when mixing. <<Sorry John, couldn't resist>>. Been hip deep in it on "another" thread....
|
|
|
Post by ragan on Mar 10, 2020 18:40:24 GMT -6
I was trying to ask this in a stam thread...but is the attack time the mount of milliseconds it takes to react to the incoming transient or the amount of time it takes to get to full reduction? That question even make sense? Attack time is the amount of time - usually measured in ms - that it takes for an ITB advocate to reach their crest / peak (measure in the US in RMS) of anger when I say that hardware is significantly better than software when mixing. <<Sorry John, couldn't resist>>. Been hip deep in it on "another" thread.... What thread? Must be on GS. All I see in your recent posts here is the SPL Iron thread in which you didn’t care for the plug and some of us like it. Unless the stance “I’m sure the hardware sounds better but I still think this plugin is good and useful” counts as an “attack” in your view?
|
|
|
Post by EmRR on Mar 10, 2020 20:07:09 GMT -6
I was trying to ask this in a stam thread...but is the attack time the mount of milliseconds it takes to react to the incoming transient or the amount of time it takes to get to full reduction? That question even make sense? It does, and there’s no agreed upon standard, every company uses one of several competing or makes up their own.
|
|
|
Post by drbill on Mar 10, 2020 20:42:00 GMT -6
Attack time is the amount of time - usually measured in ms - that it takes for an ITB advocate to reach their crest / peak (measure in the US in RMS) of anger when I say that hardware is significantly better than software when mixing. <<Sorry John, couldn't resist>>. Been hip deep in it on "another" thread.... What thread? Must be on GS. All I see in your recent posts here is the SPL Iron thread in which you didn’t care for the plug and some of us like it. Unless the stance “I’m sure the hardware sounds better but I still think this plugin is good and useful” counts as an “attack” in your view? Different thread, different forum, and the ITB proponents are not near as nice as you guys. You guys were all fine with my contrary opinion. LOL As for the Iron plugin - I just expected more. I'm sure I'll find some use for it here or there. Kinda liked the stereo widening function. That may be enough.....
|
|
|
Post by ragan on Mar 10, 2020 20:52:16 GMT -6
What thread? Must be on GS. All I see in your recent posts here is the SPL Iron thread in which you didn’t care for the plug and some of us like it. Unless the stance “I’m sure the hardware sounds better but I still think this plugin is good and useful” counts as an “attack” in your view? Different thread, different forum, and the ITB proponents are not near as nice as you guys. You guys were all fine with my contrary opinion. LOL As for the Iron plugin - I just expected more. I'm sure I'll find some use for it here or there. Kinda liked the stereo widening function. That may be enough..... Heheh. Ok just checking. I'm also still an unabashed hardware-sonics guy.
|
|
|
Post by drbill on Mar 10, 2020 22:21:06 GMT -6
Different thread, different forum, and the ITB proponents are not near as nice as you guys. You guys were all fine with my contrary opinion. LOL As for the Iron plugin - I just expected more. I'm sure I'll find some use for it here or there. Kinda liked the stereo widening function. That may be enough..... Heheh. Ok just checking. I'm also still an unabashed hardware-sonics guy. <<thumbsup>>
|
|
|
Post by adamjbrass on Mar 11, 2020 6:07:11 GMT -6
I have used this compressor and it's out of this world amazing. Contact Lukasz to order.
Here is a demo I did with it,
I've watched this video countless times. This compressor sounds absolutely AMAZING. The Distortion / Lag feature alone is pure GENIUS... would love to know how they're doing the LAG portion. Have an idea on a few ways it could be done but nevertheless, a badass control to have on a piece of analog HW. Thank you SO MUCH for making this video! It's the only one of it's kind hahaha Glad you dig! Especially coming from a boutique builder such as yourself! I appreciate it. I need to do more of these, as it seems useful to show what a tool is capable of. And also, a perfect use of a boring weekend night with nothing to do
|
|
|
Post by iamasound on Mar 11, 2020 14:16:18 GMT -6
Lots of tonal options you got going with that box and it all sounds amazing. Impressed, compressed cows say, "Mu".
|
|
|
Post by audioscape on Mar 11, 2020 17:58:09 GMT -6
I was trying to ask this in a stam thread...but is the attack time the mount of milliseconds it takes to react to the incoming transient or the amount of time it takes to get to full reduction? That question even make sense? It does, and there’s no agreed upon standard, every company uses one of several competing or makes up their own. Took the words right out of our mouths... just as there is no real standard for actually MEASURING attack / release times. There are "proper" ways but not one, steadfast agreed upon method. It makes the most sense to me to base attack time on how long it takes to react to the transient of the signal but I can also see how others may see it or feel differently...
|
|
|
Post by audioscape on Mar 11, 2020 17:59:17 GMT -6
I've watched this video countless times. This compressor sounds absolutely AMAZING. The Distortion / Lag feature alone is pure GENIUS... would love to know how they're doing the LAG portion. Have an idea on a few ways it could be done but nevertheless, a badass control to have on a piece of analog HW. Thank you SO MUCH for making this video! It's the only one of it's kind hahaha Glad you dig! Especially coming from a boutique builder such as yourself! I appreciate it. I need to do more of these, as it seems useful to show what a tool is capable of. And also, a perfect use of a boring weekend night with nothing to do You're too kind!!! ;-) You definitely do. You have a knack for it. SO MANY videos are just to "tame" IMO and don't go to the EXTREMES of the gear being demo'd. Be that on both ends of the "subtle" and EXTREME spectrum....! Good job again man.
|
|
|
Post by Ward on Mar 12, 2020 16:28:57 GMT -6
I have used this compressor and it's out of this world amazing. Contact Lukasz to order.
Here is a demo I did with it,
Did I ever enjoy that!! Mucho respect for your deadly demoing skills and WOW... what a nice piece of kit!
|
|
|
Post by ragan on Mar 12, 2020 18:15:44 GMT -6
I have used this compressor and it's out of this world amazing. Contact Lukasz to order.
Here is a demo I did with it,
Man, gotta echo the others here. Great demo. Thanks for actually pushing the thing into all the various sonic nooks and crannies it has to offer. Sounds like a really nice piece.
|
|
ericn
Temp
Balance Engineer
Posts: 14,817
|
Post by ericn on Mar 12, 2020 21:20:06 GMT -6
I have used this compressor and it's out of this world amazing. Contact Lukasz to order.
Here is a demo I did with it,
Have to agree Adam great video.
|
|
|
Post by adamjbrass on Mar 13, 2020 5:41:25 GMT -6
Thanks Peeps! I’ll do more with other boxes!
|
|