|
Post by indiehouse on Nov 17, 2019 18:46:33 GMT -6
Back on topic, nothing exciting, but my potential list software-wise: AudioThing Springs IK Tape Machine Collection Fuse Audio Lab VCL-4 and VCL-25A Fuse is on sale now I think.
|
|
|
Post by indiehouse on Nov 17, 2019 20:00:10 GMT -6
Would you say the 286 is similar in topology to the V72? Wondering if a second CA70 would be more beneficial (mainly for running stereo tracks during mixing), or adding a single 286 to my CA70. I have a Tab-Funkenwork V72S, so I have that sound covered. It is very different. A CA-286 would very much compliment your CA-70. You would be very happy. Ultimate vocal chain? Free Tube De-Essing? I gotta get some phantom power to those. Been wanting to use my km84 into my CA70 on multiple occasions.
|
|
|
Post by johneppstein on Nov 17, 2019 21:59:52 GMT -6
For the record, in SD3 you can have whatever bleed you'd like from any of the mics, from zero up to the full bleed as it was tracked. I keep mine at 100% bleed because you're right, it doesn't sound natural without it. No, you can't. You may be able to control the amount of bleed as tracked (more or less) by the people recording the sample, but you have no control whatsoever over the quality of the bleed as determined by the selection (quality) and placement of the microphone, which is all important.
TOTALLY different things.
Why am I getting the feeling that you don't understand the art of recording?
So you're baffled by anybody who doesn't agree with your premise.
Fine. You have my sympathy.
|
|
|
Post by ragan on Nov 17, 2019 22:29:16 GMT -6
For the record, in SD3 you can have whatever bleed you'd like from any of the mics, from zero up to the full bleed as it was tracked. I keep mine at 100% bleed because you're right, it doesn't sound natural without it. No, you can't. You may be able to control the amount of bleed as tracked (more or less) by the people recording the sample, but you have no control whatsoever over the quality of the bleed as determined by the selection (quality) and placement of the microphone, which is all important.
TOTALLY different things.
Why am I getting the feeling that you don't understand the art of recording?
So you're baffled by anybody who doesn't agree with your premise.
Fine. You have my sympathy.
Not worth the back and forth anymore. Too much stuff to correct/clarify to be worthwhile. I don't know where your compulsion to be constantly standoffish comes from but I'm sure it far predates online gear forums. Either way I seem to have run out of energy for humoring it. Maybe some folks still find it cute or novel or whatever but I just find it tiring so I'll be off.
|
|
|
Post by chessparov on Nov 17, 2019 23:20:53 GMT -6
Maybe I ought to make "World Peace", my Black Friday wish. Maybe we'll just start with RGO. I make a motion, in the Spirit of the Holidays... To put all this behind us. Other than making fun of those with lesser gear-of course! Wait! I might get a used Alesis SR16, scratch that last sentence. Chris
|
|
|
Post by jcoutu1 on Nov 18, 2019 5:48:24 GMT -6
Why am I getting the feeling that you don't understand the art of recording?Why the constant personal attacks? Nobody here wants to read these attacks. Keep them to yourself.
|
|
|
Post by jamiesego on Nov 18, 2019 10:35:08 GMT -6
It is very different. A CA-286 would very much compliment your CA-70. You would be very happy. Ultimate vocal chain? Free Tube De-Essing? I gotta get some phantom power to those. Been wanting to use my km84 into my CA70 on multiple occasions. I’ve been using a Rolls phantom supply. They’re affordable. Haven’t had any issues. I’m sure the Coil supply is built like a tank. Might try that someday if I have some spare cash.
|
|
|
Post by Tbone81 on Nov 18, 2019 11:23:36 GMT -6
I just picked up Eiosis e2Deesser for $49 direct off their website. That, with Soundtoys upgrade that was on sale, has put me well on my way to ditching the Slate Everything bundle.
|
|
|
Post by Coil Audio on Nov 18, 2019 12:27:03 GMT -6
It is very different. A CA-286 would very much compliment your CA-70. You would be very happy. Ultimate vocal chain? Free Tube De-Essing? I gotta get some phantom power to those. Been wanting to use my km84 into my CA70 on multiple occasions. Yes you do - km84's are quite spectacular thru both circuits. As jamiesego said, rolls boxes work well and are a cheap workaround - we also recommend the discontinued Audio Technica CP8506 (atus cp8506) that can be found on the used market. Of course we make the 4-channel CP-448 which breaks down to a few bucks more per channel than a new Rolls but it is seriously overbuilt piece of kit compared to both those other alternatives (linear-regulated etc)- furthermore it can be also be used as a weapon against fascists.
|
|
|
Post by MorEQsThanAnswers on Nov 18, 2019 13:15:43 GMT -6
Sound Theory and Oeksound have announced sales!!!
|
|
|
Post by indiehouse on Nov 18, 2019 14:00:55 GMT -6
I gotta get some phantom power to those. Been wanting to use my km84 into my CA70 on multiple occasions. Yes you do - km84's are quite spectacular thru both circuits. As jamiesego said, rolls boxes work well and are a cheap workaround - we also recommend the discontinued Audio Technica CP8506 (atus cp8506) that can be found on the used market. Of course we make the 4-channel CP-448 which breaks down to a few bucks more per channel than a new Rolls but it is seriously overbuilt piece of kit compared to both those other alternatives (linear-regulated etc)- furthermore it can be also be used as a weapon against fascists. What would a I be giving up sonically by going with the Audio Technical over the Coil?
|
|
|
Post by Quint on Nov 18, 2019 14:42:44 GMT -6
I gotta get some phantom power to those. Been wanting to use my km84 into my CA70 on multiple occasions. Yes you do - km84's are quite spectacular thru both circuits. As jamiesego said, rolls boxes work well and are a cheap workaround - we also recommend the discontinued Audio Technica CP8506 (atus cp8506) that can be found on the used market. Of course we make the 4-channel CP-448 which breaks down to a few bucks more per channel than a new Rolls but it is seriously overbuilt piece of kit compared to both those other alternatives (linear-regulated etc)- furthermore it can be also be used as a weapon against fascists. I have the AT CP8506 and have been hoping that someone would eventually make something similar. I'll have to check out the CP-448.
|
|
|
Post by Coil Audio on Nov 18, 2019 16:56:52 GMT -6
Yes you do - km84's are quite spectacular thru both circuits. As jamiesego said, rolls boxes work well and are a cheap workaround - we also recommend the discontinued Audio Technica CP8506 (atus cp8506) that can be found on the used market. Of course we make the 4-channel CP-448 which breaks down to a few bucks more per channel than a new Rolls but it is seriously overbuilt piece of kit compared to both those other alternatives (linear-regulated etc)- furthermore it can be also be used as a weapon against fascists. What would a I be giving up sonically by going with the Audio Technical over the Coil? There is a loss in detail, especially noticeable in the top end, and less extension in the low end. Might be due to how they're doing the DC blocking, cap choice, etc. There's also increased headroom before distortion in ours due to all the extra gas (mA/current) in the tank. Both Steve and I used the audio technica boxes at multiple studios for years. Always felt they we're very sturdy, put out an actual 48v (not some watered down lower voltage), and never felt they were a compromise at all... until we compared one with our first prototype. We were actually taken aback by how much of a difference. We weren't trying to reinvent 48v when we designed it, just trying to make a very robust, overbuilt, linear mic supply. Apparently even solid state devices like good stiff regulated power.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 18, 2019 17:36:56 GMT -6
i'm thinking about Sonarworks 4 - there is a 40% off deal which seems pretty cool.
|
|
|
Post by Guitar on Nov 18, 2019 17:44:47 GMT -6
Is anybody showing an Eventide Anthology discount? I own 10 plugins and all I am seeing is a $500 price. I heard somebody saw $99 with ten plugins.
EDIT: I found the button to click on my offer is $149 for Anthology
|
|
|
Post by jampa on Nov 18, 2019 19:48:12 GMT -6
Well, if any of the following go on sale for BF / CM, I'll be forced to break out my wallet, LOL: Sononym Opticom XLA-3 Audiothing Outer Space CraveEQ Gulfoss BassRoom Tim Petherick Nebula Libraries Tick-tock, tick-tock... I have and don't use the Opticom XLA-3. I'll send you a PM
|
|
|
Post by Ward on Nov 18, 2019 22:13:15 GMT -6
Ozone 9
|
|
|
Post by MorEQsThanAnswers on Nov 19, 2019 18:55:13 GMT -6
|
|
|
Post by adamjbrass on Nov 20, 2019 11:15:00 GMT -6
But only with real drummer and not a M1D1 patch... I don't know how to mic a MIDI patch. There is something called a Re-amp. But, oh. lemme guess...you don't use them, because its not like recording a real guitar player with his amp shoved directly up his ass
|
|
|
Post by avgatzeblouz on Nov 20, 2019 14:23:09 GMT -6
I'm looking everyday at the Liquidsonics page, hoping Seventh Heaven pro will be on sale. That and Echorec would be awesome for me this year.
|
|
|
Post by chessparov on Nov 20, 2019 14:38:01 GMT -6
I don't know how to mic a MIDI patch. There is something called a Re-amp. But, oh. lemme guess...you don't use them, because its not like recording a real guitar player with his amp shoved directly up his ass Like I told you guys... A YouTube show with both of you-would be a big hit! Kinda like the Wrestling days of yore. "Freddie Blassie vs." Then they'd go hang out at the local bar afterwards. Chris
|
|
|
Post by Guitar on Nov 20, 2019 14:47:39 GMT -6
I came for the gear, I stayed for the direct personal conflicts.
|
|
|
Post by jcoutu1 on Nov 20, 2019 14:52:11 GMT -6
I'm hoping for free Waves WUP! I finally upgraded my computer and the only thing (at least that I've found so far) that isn't working are Waves plugs. $240 to get my Waves back working. Such a bummer.
|
|
|
Post by notneeson on Nov 20, 2019 15:12:13 GMT -6
I came for the gear, I stayed for the direct personal conflicts. Screw you dude!! 😂 PS, remember that time you corrected me about API 550 gain steps on the purple board? We were both right, past a certain point they are 3db steps, but it starts as 2db. Pistols at dawn?
|
|
|
Post by indiehouse on Nov 20, 2019 15:19:05 GMT -6
Coil Audio CAPI Magic Death Eye Plugin Kush AR-1 DMG TrackComp Vertigo VSC-3 Weber Speaker (for my '78 Fender VibroChamp) Spectrasonics Keyscape Guitar Mill (strat or tele build)
|
|