|
Post by jtc111 on Dec 19, 2018 13:47:13 GMT -6
Speaking of design, I saw a FB post from Stam announcing a new product design, a new mic called the SA-57. As great as that sounds, and I’m sure Stam is itching to release some new stuff, it sure doesn’t sit right considering the enormous backlog of orders. Now, I didn’t see where he was taking orders, but still, if someone there has the time to be designing new mics, they should instead grab a soldering iron and help get these back orders cleared out. It’s just bad optics, if nothing else.
|
|
|
Post by stam on Dec 19, 2018 14:14:59 GMT -6
Hey Guys
Please be patient with Camila, she is at full capacity
Feel free to re-send your email if it's urgent
We are getting 20 units out every day and operating at full capacity
Thanks
|
|
|
Post by kcatthedog on Dec 19, 2018 15:57:36 GMT -6
Well, I don’t know any stam secrets but Joshua mentioned here recently that he has a number of new products coming, so I have been expecting teasers?
For the adg’s, I have understood a few will get shipped dec, the rest of the first 150 batch shipped in January. So, I am expecting final bill shipping confirmation in January?
|
|
|
Post by the other mark williams on Dec 20, 2018 2:49:24 GMT -6
Well, I don’t know any stam secrets but Joshua mentioned here recently that he has a number of new products coming, so I have been expecting teasers? For the adg’s, I have understood a few will get shipped dec, the rest of the first 150 batch shipped in January. So, I am expecting final bill shipping confirmation in January? I still think you're being optimistic, brother.
|
|
|
Post by kcatthedog on Dec 20, 2018 4:05:21 GMT -6
We'll see but I was just restating what we have run told: Anyway , I am re -reading my Shakespeare, All's well that ends Well, ah , for no particular reason !
|
|
|
Post by Ward on Dec 20, 2018 11:58:39 GMT -6
Speaking of design, I saw a FB post from Stam announcing a new product design, a new mic called the SA-57. As great as that sounds, and I’m sure Stam is itching to release some new stuff, it sure doesn’t sit right considering the enormous backlog of orders. Now, I didn’t see where he was taking orders, but still, if someone there has the time to be designing new mics, they should instead grab a soldering iron and help get these back orders cleared out. It’s just bad optics, if nothing else. If this is a clone of the Neumann-east UM57 from the late 50s through 70s, well it could be a heck of a microphone. My UM57 is pure gold. But PLEASE stam, hold off on any more new products until these ones are up and running and delivered.
|
|
|
Post by Ward on Dec 20, 2018 12:04:48 GMT -6
|
|
|
Post by jtc111 on Dec 20, 2018 17:08:37 GMT -6
I got a few nasty emails from " he who will not deliver on time be named" because of that little graphic I made.
|
|
|
Post by kcatthedog on Dec 20, 2018 19:37:09 GMT -6
Personally, I still like my pool idea on who actually gets the first adg and when ?
|
|
|
Post by Quint on Dec 20, 2018 19:47:05 GMT -6
I'm thinking that, if Stam's optimistic opinion is that the first batch of ADGs will begin shipping in January, the optimistic view for the second batch is that they might ship in March. Which means the realistic view is that my second batch ADG will ship in April or May.
If there is still ADG stock left after the second batch commitments are fulfilled, I may go ahead and buy a second one using the promised discount I was offered due to the wait.
As for the pair of 1073eqs I ordered, I don't have any idea what batch I'm even in. Was there more than one batch? I'm assuming so.
|
|
|
Post by kcatthedog on Dec 20, 2018 19:59:26 GMT -6
Certainly frustrating, but I have had good response times emailing Camila have you used this ? camila@stamaudio.com
|
|
|
Post by wiz on Dec 20, 2018 20:47:12 GMT -6
stamCan you please check your email and Camilla’s . I got an automated response from her email saying she’s unavailable for a couple of days. I have been contacted by DHL and there is a problem with my shipment of SA47 and SA3A Due to a paperwork error. I have sent both of you a copy of an email sent to me by DHL with information they required to release equipment Peter Knight
|
|
|
Post by ragan on Dec 20, 2018 21:27:26 GMT -6
^^^^Get Wiz his gear so we can hear about it ^^^
|
|
|
Post by 000 on Dec 20, 2018 22:47:01 GMT -6
Personally, I still like my pool idea on who actually gets the first adg and when ? Can I get on this?? First 100 here! Just received my 1073mpa with a personalized message from Camila written in sharpie on the front of the box. Based on the sound of this unit - you guys should be excited!!
|
|
|
Post by Martin John Butler on Dec 21, 2018 8:37:35 GMT -6
I'm still loving my little SA73 single channel, so I'm not surprised the 1073 MPA sounds great. When you've had a piece for quite a while and you're still using it, you know it's the real deal and not just an infatuation.
|
|
|
Post by subspace on Dec 21, 2018 8:46:55 GMT -6
As for the pair of 1073eqs I ordered, I don't have any idea what batch I'm even in. Was there more than one batch? I'm assuming so. Posted by Stam yesterday: "The 1073EQ, ADG and Pultec will be shipped simultaneously."
|
|
|
Post by stam on Dec 21, 2018 15:35:09 GMT -6
Looks like the first one will be shipping next Wednesday!
We made it in December after all
|
|
|
Post by ragan on Dec 21, 2018 15:50:05 GMT -6
Looks like the first one will be shipping next Wednesday! We made it in December after all Oh right on! So I should have it by the 3rd or so. Pumped!
|
|
|
Post by Johnkenn on Dec 21, 2018 15:51:03 GMT -6
You need my address?
|
|
|
Post by lcr on Dec 21, 2018 16:28:49 GMT -6
Im first batch qty 2, I prefer mine to ship as a pair so you guys thumb wrestle for this one, settle it like men.
|
|
|
Post by kcatthedog on Dec 21, 2018 16:35:04 GMT -6
Your honour, the defence rests ! : wonder who lucky #1 is ?
|
|
|
Post by Johnkenn on Dec 21, 2018 16:35:38 GMT -6
I believe I'm closer to the equator, so shipping will be cheaper...just saying.
|
|
|
Post by lcr on Dec 21, 2018 16:39:01 GMT -6
As for the pair of 1073eqs I ordered, I don't have any idea what batch I'm even in. Was there more than one batch? I'm assuming so. Posted by Stam yesterday: "The 1073EQ, ADG and Pultec will be shipped simultaneously." Excellent news.
|
|
|
Post by Ward on Jan 1, 2019 9:02:40 GMT -6
Happy 2019... anyone have a 76ADG or 76ADF they can tell us about, You know, for encouragement. Please.
|
|
|
Post by kcatthedog on Jan 1, 2019 9:05:49 GMT -6
Yes happy 2019 !
For what it is worth I have been told one of my two will ship perhaps at the end of this week ?
I know we all need some encouragement so when it lands I will quickly do an unboxing , quick pop the top look and first use video ASAP : let's start 2019 off right !
|
|