|
|
Post by mulmany on Aug 4, 2017 20:45:57 GMT -6
Title says it all... Looking at building a Zayance Sta-level.
Anything to watch out for?
|
|
|
|
Post by curlygates on Aug 5, 2017 7:12:03 GMT -6
I have not finished mine yet but have completed sourcing parts and will be wiring as soon as case, and a few parts arrive over the next couple weeks. Haven't seen to many people having to many problems building these. A few problems here and there seem to be easily resolved over the berndue build treads at GDIY. Their was a case offering by kid squid that included some of the pots and power supply transformer for those like myself who chose to go that way. Pcb from zayance. i just went with sowter transformers,components from mouser, meter from don audio,tubes from bowie. Should be an fairly straightforward and not overly difficult build i believe especially for anyone who has built much gear before. Seems to be good trouble shooting help on group diy. Also like me, I assume several others will be starting their builds as their cases come in over the next few weeks and that should add helpful content to the build threads.
|
|
|
|
Post by mdmitch2 on Aug 5, 2017 7:14:22 GMT -6
I'm also waiting for the squid kid case -- I believe winetree as well. |
|
|
|
Post by winetree on Aug 5, 2017 13:11:55 GMT -6
Yes, I should be getting two cases, pots and transformers. I have the P.S.B.s
However I haven't sourced any other parts yet. Too many projects.
Curlgates would you mind sharing you Mouser Cart with me. It would be a great time saver.
Looking forward to this build and other comments.
|
|
|
|
Post by mulmany on Aug 5, 2017 13:42:01 GMT -6
Thanks guys, found the Kid-Squid thread to late to jump on a set. Let me know how it goes when you get the cases.
|
|
|
|
Post by mdmitch2 on Aug 5, 2017 20:17:40 GMT -6
Oooh yes -- mouser cart would be great.
|
|
|
|
Post by mdmitch2 on Aug 18, 2017 9:26:32 GMT -6
I just received my case -- but I've yet to order parts, other than the PCB. If anyone has a mouser cart, please post here! Thanks.
|
|
|
|
Post by winetree on Aug 18, 2017 11:44:49 GMT -6
Got my 2 cases, transformers and pots yesterday.
Getting lazy and also looking for a mouser cart.
In the mean time I still have too many projects still waiting to be finished.
|
|
|
|
Post by porkyman on Nov 7, 2017 20:35:05 GMT -6
Anyone finished theirs? I've completed mine but keep burning R3 out on PSU. I've upped the value but no bueno. Any thoughts?
|
|
|
|
Post by cademan7 on Nov 8, 2017 2:30:26 GMT -6
used a 25 watt aluminum wire wound and just mounted it to the case. Works like a champ! Could probably be fine with 10 or 15 watt.
|
|
|
|
Post by porkyman on Nov 8, 2017 13:48:15 GMT -6
used a 25 watt aluminum wire wound and just mounted it to the case. Works like a champ! Could probably be fine with 10 or 15 watt. Will try. Thanks. |
|
