|
|
Post by mobeach on Aug 11, 2013 17:09:26 GMT -6
I'm not sure how many of you are into metal, but I really like the overall production of this song, and I'm curious how they mask the vocals at 2:57, I'm not even sure what the technique is called or what is used. At the tail end of it the rest of the song just booms back to life.
Thanks!
|
|
|
|
Post by henge on Aug 11, 2013 19:40:24 GMT -6
It can be done with any filter fx like FilterFreak etc. Or even a simple eq hi and lo passing until you get the sound you want into a saturation/distortion plug.
Just filter out the lows and highs until you hear what you like. Maybe run it through a modulation effect for movement and surround it with a short reverb.
|
|
|
|
Post by mobeach on Aug 11, 2013 20:02:15 GMT -6
Sounds easy enough! Almost time for a new Hockey thread  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Aug 11, 2013 20:22:20 GMT -6
mobeach there is a new hockey thread in the offtopic section!
|
|
|
|
Post by mobeach on Aug 12, 2013 5:37:48 GMT -6
It can be done with any filter fx like FilterFreak etc. Or even a simple eq hi and lo passing until you get the sound you want into a saturation/distortion plug. Just filter out the lows and highs until you hear what you like. Maybe run it through a modulation effect for movement and surround it with a short reverb. This can be done in Reaper correct? |
|
|
|
Post by henge on Aug 12, 2013 5:51:04 GMT -6
Hey MoBeach. Here's an fx chain using Reapers native fx. It starts with Reaeq for fltering into a JS saturation plug and into reacomp. Tweak to taste or add better saturation if you have it. MoBeach Vox FX.RfxChain (794 B) |
|
|
|
Post by mobeach on Aug 12, 2013 9:02:59 GMT -6
Thanks a bunch! I've been playing so much bass for live bands I've fallen way behind on my DAWs. Every time I open the program it's like, duhhh what do I do again?
|
|
|
|
Post by scumbum on Aug 12, 2013 15:09:39 GMT -6
It can be done with any filter fx like FilterFreak etc. Or even a simple eq hi and lo passing until you get the sound you want into a saturation/distortion plug. Just filter out the lows and highs until you hear what you like. Maybe run it through a modulation effect for movement and surround it with a short reverb. This can be done in Reaper correct? What they did with the vocal can be done with pretty much any EQ . You just cut all the bass freqs . |
|
|
|
Post by mobeach on Aug 12, 2013 16:02:41 GMT -6
Danke'!
|
|
|
|
Post by Gustav on Aug 13, 2013 2:58:11 GMT -6
You can also automate some movement in the filters to make it sweep and open up (maybe even with a break before fully opening it up). Its a pretty dated trick to my ears, but might be to your liking. Metal? Really?  Gustav |
|
